RVVP 2x1.0mm² Shielded Sensor Cable Braided Copper Instrument Signal EMI Protection 300/500V
Product Summary
Product Details
Product Description
RVVP 2x1.0mm² Shielded Sensor Cable Braided Copper Instrument Signal EMI Protection 300/500V
Cable Designation & Meaning
|
Code |
Meaning |
|---|---|
|
R |
Flexible conductor (Class 5 fine-stranded) |
|
V |
PVC insulation |
|
V |
PVC sheath |
|
P |
Copper wire shield (braid or braid+tape) |
|
2×1.0 mm² |
Two cores, each 1.0 mm² copper |
Construction: Two fine-stranded flexible copper conductors, each PVC insulated, laid up with fillers to form a round core assembly, wrapped with copper braid shield (typically 85%–90% coverage), and extruded with a common round PVC outer sheath.
Applicable Standards
- JB/T 8734.5-2016 — Rated voltages up to and including 450/750 V PVC insulated cables and cords for fixed wiring and flexible applications — Part 5: Shielded flexible cables
- GB/T 5023.5-2008 / IEC 60227-5 — Polyvinyl chloride insulated cables — Flexible cables (cords)
- GB/T 3956 / IEC 60228 — Conductors (Class 5 flexible copper)
- GB/T 2951 / IEC 60811 — Insulating and sheathing materials — Common test methods
- GB/T 18380 / IEC 60332-1 — Flame retardant (single cable, passes)
- GB/T 5441 — Communication cable test methods (shielding effectiveness reference)
RVVP 2×1.0 mm² — Shielded Flexible PVC Control Cable — Specification & Engineering Data
1. Overview & Ratings. RVVP 2×1.0 is a shielded flexible PVC control cable rated 300/500 V, 70 °C continuous. Built per GB/T 9330 / IEC 60227. Two 1.0 mm² fine-stranded copper conductors (~32×0.20 mm) enclosed in a copper wire braid shield (≥ 80% coverage) and PVC outer sheath. Designed for audio and data signal circuits. Finished OD ≈ 6.8 mm, ≈ 85 kg/km, 100 m coils.
2. Construction Stack (Conductor → Outer).
| Layer | Build | Wall | Diameter |
|---|---|---|---|
| Conductors (×2) | Fine-stranded annealed Cu, Class 5, 2×1.0 mm² | — | ≈ 1.3 mm each |
| PVC insulation | Polyvinyl chloride, per core | ≈ 0.6 mm | ≈ 2.5 mm each |
| Copper braid shield | Tinned copper wire braid, ≥ 80% coverage | ≈ 0.4 mm | ≈ 5.6 mm |
| PVC outer sheath | PVC, dark blue-gray | ≈ 1.1 mm | ≈ 6.8 mm (finished) |
3. Electrical Characteristics. DC resistance ≤ 19.5 Ω/km at 20 °C (flexible Cu 1.0 mm²); test voltage 2.0 kV AC / 5 min; insulation resistance ≥ 20 MΩ·km. Shield resistance ≤ 20 Ω/km. Nominal ampacity ≈ 9 A (audio/data signal). Mutual capacitance ≤ 200 pF/m.
Insulation & Sheath Data
|
Property |
Value |
|---|---|
|
Insulation material |
PVC (polyvinyl chloride), Type TI1/TI2 |
|
Outer sheath material |
PVC (polyvinyl chloride), Type TM1/TM2 |
|
Long-term service temp. |
70 °C (continuous, both insulation & sheath) |
|
Short-circuit temp. (≤5 s) |
160 °C (Cu conductor limit for PVC) |
|
Emergency overload temp. |
105 °C (short term) |
|
Test voltage AC (5 min) |
2.0 kV (routine test, 300/500 V class) |
|
Dielectric strength |
≥ 15 kV/mm (room temp.) |
|
Shielding effectiveness |
≥ 60 dB at 30 MHz – 100 MHz (typical copper braid) |
|
Transfer impedance |
≤ 100 mΩ/m at 10 MHz (typical) |
Electrical Parameters
|
Parameter |
Value |
Note |
|---|---|---|
|
Rated voltage U₀/U |
300 / 500 V |
JB/T 8734.5 / GB/T 5023.5 |
|
Max. system voltage |
500 V AC |
— |
|
Test voltage AC (5 min) |
2.0 kV |
Routine test (core-to-core, core-to-shield) |
|
DC resistance @20 °C |
≤ 19.5 Ω/km |
GB/T 3956 Class 5 Cu max, 1.0 mm² |
|
AC resistance @70 °C (est.) |
≈ 24.8 Ω/km |
per core |
|
Current rating in air (30 °C) |
10 A |
2-core, open air, reference value |
|
Current rating in tray (30 °C) |
9 A |
bundled with other cables |
|
Current rating in conduit (30 °C) |
7 A |
enclosed |
|
Short-circuit current (1 s, Cu, 160 °C) |
≈ 0.11 kA (110 A) |
1.0 mm² Cu |
|
Capacitance (core-to-core, approx.) |
≈ 115 pF/m |
PVC insulation |
|
Capacitance (core-to-shield, approx.) |
≈ 170 pF/m |
collective shield |
|
Inductive reactance (approx.) |
≈ 0.08 Ω/km |
at 50 Hz |
|
Frequency |
50/60 Hz AC (signal up to ~10 MHz) |
— |
Reference values: 2×1.0 mm² at 7–10 A, single-phase 230 V → max load ≈ 1.6–2.3 kW. Primarily intended for signal and low-to-medium current control (mA to ~2 A levels), not general power distribution.
4. Thermal & Mechanical. 70 °C continuous; 160 °C short-circuit (≤ 5 s); ambient −15~+70 °C. Bend ≥ 6 × OD ≈ 41 mm. Balances current capacity and flexibility.
Temperature Characteristics
|
Property |
Value |
|---|---|
|
Max. conductor operating temp. |
70 °C (continuous) |
|
Max. short-circuit temp. (≤5 s) |
160 °C (Cu conductor, PVC limit) |
|
Emergency overload temp. |
105 °C (not recommended for continuous) |
|
Min. installation ambient temp. |
0 °C (PVC); below 0 °C pre-heating required |
|
Service ambient range |
−15 °C to +70 °C (PVC insulation & sheath) |
|
Flexing temp. range |
+5 °C to +70 °C (recommended for repeated bending) |
|
Fire survival |
Standard (flame retardant single cable) |
Fire Performance (RVVP — Standard)
|
Property |
Value / Requirement |
|---|---|
|
Flame retardant |
IEC 60332-1 (single cable, passes) |
|
Halogen content |
Contains halogen (PVC insulation & sheath) |
|
Smoke density |
Standard (non-low-smoke) |
|
Corrosivity |
Corrosive (PVC) |
|
Fire survival (circuit integrity) |
Not applicable (standard version) |
|
EMI shielding |
Yes (copper braid, 85%–90% coverage) |
Shielding Performance
|
Parameter |
Value |
Note |
|---|---|---|
|
Shield type |
Copper wire braid (bare or tinned) |
— |
|
Coverage |
85%–90% (typical) |
>90% available on request |
|
Optional |
Copper braid + aluminium polyester tape (dual shield) |
for high EMI environments |
|
Drain wire |
Not required (braid is continuous) |
— |
|
Shielding effectiveness |
≥ 60 dB @ 30–100 MHz |
typical braid |
|
Transfer impedance |
≤ 100 mΩ/m @ 10 MHz |
— |
|
Application |
EMI/RFI protection for signal and control circuits |
— |
5. Installation Practice & Handling. Use shielded connectors. Ground shield at one or both ends. At 85 kg/km, light — 30% heavier than RVVP 2×0.75. Indoor use.
Mechanical & Installation Parameters
|
Parameter |
Value |
Remarks |
|---|---|---|
|
Minimum bending radius |
≥ 6 × OD → ≈ 43 mm at Ø7.2 mm |
flexible conductor, shielded |
|
Max. pulling tension |
80 N |
fine-stranded Cu (handle gently) |
|
Direct burial |
Not recommended (no mechanical protection; use conduit) |
— |
|
Surface mounting |
Good (round profile, cable ties or clips) |
— |
|
Conduit ID |
≥ 12 mm |
— |
|
Fixing |
cable ties, clamps, trunking |
— |
|
Impact resistance |
Low (PVC sheath only) |
protect with conduit in exposed areas |
|
Water resistance |
Moisture-resistant (PVC) |
not waterproof |
|
UV resistance |
Poor (PVC degrades in sunlight) |
indoor use only |
|
Flex life |
High (Class 5 fine-stranded, designed for occasional flexing) |
— |
|
Termination note |
Strip sheath, fold braid back over outer sheath, use heat-shrink or copper strap for shield termination; ferrules recommended for fine-stranded conductors |
shield must be grounded at one end (or both, depending on application) |
6. Typical Service Applications. Audio interconnection, data transmission lines, sensor signal wiring, alarm circuits, instrumentation interconnection — medium-level signal circuits needing noise protection.
7. Testing & QA Regime. Routine: conductor DC resistance, 2.0 kV AC withstand, insulation resistance, shield coverage check, dimensional check. Type: heating test, bending test, flame retardancy, mutual capacitance measurement.
Cable Parameters
| RVVP 2×1.0 mm² — Shielded Flexible PVC Control Cable — Full Parameter Sheet | ||||
| Shielded control · 2× flexible Cu / PVC insulation / copper braid shield / PVC sheath · 300/500 V · 70 °C · ≈ 6.8 mm · audio/data signal | ||||
| Section | Parameter | Value | Unit | Remarks / Standard |
| 01 · Identification | ||||
| Cable type | RVVP — shielded flexible PVC control cable | — | Audio / data | |
| Rated voltage (U0/U) | 300/500 | V | Signal / control | |
| Number of cores | 2 × 1.0 | — | 2-core | |
| Conductor material | Annealed copper, fine-stranded | — | Class 5 flexible | |
| Insulation material | PVC (polyvinyl chloride) | — | Per core | |
| Shield type | Copper wire braid (P) | — | ≥ 80% coverage | |
| Sheath material | PVC (outer, dark blue-gray) | — | Flexible | |
| Standard | GB/T 9330 / IEC 60227 | — | Control cable | |
| Application | Audio interconnection, data lines, sensor signal, instrumentation | — | Signal | |
| 02 · Conductor (Flexible Cu) | ||||
| Conductor type | Fine-stranded annealed copper | — | Class 5 flexible | |
| Conductor area | 2 × 1.0 | mm² | 2-core | |
| Stranding construction | ≈ 32 × 0.20 mm (approx.) | — | Fine strands | |
| DC resistance @ 20 °C | ≤ 19.5 | Ω/km | Cu 1.0 mm² flexible | |
| Conductor weight per km | ≈ 19 | kg/km | 2×1.0 Cu | |
| Conductor diameter | ≈ 1.3 | mm | Flexible stranded | |
| 03 · Insulation & Shield | ||||
| Insulation type | PVC (per core) | — | General-purpose | |
| Insulation thickness | ≈ 0.6 | mm | 300/500 V | |
| Insulated core OD | ≈ 2.5 | mm | Per core | |
| Shield type | Copper wire braid | — | P = shield | |
| Shield coverage | ≥ 80 | % | EMI protection | |
| Shield diameter | ≈ 5.6 | mm | Over cores | |
| 04 · Sheath | ||||
| Sheath type | PVC outer sheath | — | Flexible | |
| Sheath thickness | ≈ 1.1 | mm | Control cable | |
| Finished outer diameter | ≈ 6.8 | mm | Overall | |
| Sheath color | Dark blue-gray | — | Standard | |
| 05 · Electrical | ||||
| Rated voltage (U0/U) | 300/500 | V | Signal / control | |
| Max voltage | 500 | V | Phase-to-phase | |
| DC resistance @ 20 °C | ≤ 19.5 | Ω/km | Flexible Cu 1.0 | |
| Test voltage (AC) | 2.0 kV / 5 min | — | Routine | |
| Insulation resistance | ≥ 20 | MΩ·km | PVC | |
| Nominal current (ampacity) | ≈ 9 | A | Audio / data | |
| Shield resistance | ≤ 20 | Ω/km | Braid shield | |
| 06 · Thermal | ||||
| Max conductor temp. | 70 | °C | PVC rated | |
| Short-circuit temp. | 160 | °C | Max 5 s | |
| Ambient range | -15 ~ +70 | °C | Indoor | |
| Laying temperature | ≥ -10 | °C | Flexible | |
| 07 · Mechanical & Shield | ||||
| Min bending radius (fixed) | ≥ 6 × OD ≈ 41 | mm | Shielded | |
| Flexibility | Very good | — | Fine strands | |
| Shield attenuation | EMI/RFI protected | — | Copper braid | |
| Cable weight per km | ≈ 85 | kg/km | Light | |
| 08 · Installation | ||||
| Laying methods | Audio cables, data lines, sensor wiring, panel interconnection | — | Signal | |
| Connectors | Crimp ferrules / RCA / 3.5mm / D-sub | — | Shielded | |
| Shield termination | Ground at one or both ends | — | Per system | |
| Bend radius | ≥ 6 × OD ≈ 41 mm | — | Flexible | |
| 09 · Packing | ||||
| Standard supply length | 100 m / coil | m | Control cable | |
| Reel / packing type | Coil, wrapped | — | Plastic bag | |
| Surface marking | RVVP, 2×1.0, 300/500V, GB/T 9330 | — | Continuous printing | |
| Approx. cable weight | ≈ 85 | kg/km | 2-core shielded | |
| 10 · Applications | ||||
| Typical use | Audio interconnection, data transmission, sensor signal, alarm circuits, instrumentation | — | Signal | |
| Max system voltage | 500 | V | 300/500 V | |
| Application level | Signal / low-power | — | Audio / data | |
Cable Test Parameters
| Test Parameters — RVVP 2×1.0 mm² Shielded Control Cable | ||||
| No. | Test Item | Test Condition / Method | Requirement | Type |
| 1 | Conductor DC resistance | GB/T 3956, 20 °C | ≤ 19.5 Ω/km (flexible Cu 1.0) | Routine |
| 2 | Voltage test (AC) | 2.0 kV AC, 5 min | No breakdown | Routine |
| 3 | Insulation resistance | 500 V DC | ≥ 20 MΩ·km | Routine |
| 4 | Insulation thickness | Micrometer | ≥ 0.6 mm | Routine |
| 5 | Shield coverage | Visual / microscopic | ≥ 80% braid coverage | Routine |
| 6 | Shield continuity | Per GB/T 9330 | Shield electrically continuous | Routine |
| 7 | Heating test | 70 °C conductor, 2 h | No damage | Type |
| 8 | Flexibility / bending test | 6× OD, cycles | No damage | Type |
| 9 | Flame retardancy | IEC 60332-1 | Self-extinguishing | Type |
| 10 | Dimensional check | Caliper | OD ≈ 6.8 mm | Routine |
| 11 | Mutual capacitance | Per GB/T 9330 | ≤ 200 pF/m | Type |
| 12 | Printing legibility | Visual | Marking readable | Routine |
Cable Cross Section Structure
| RVVP 2×1.0 mm² — Cross-Section Construction Diagram (Schematic) | |||||
| Shielded control cable: 2×flexible Cu → PVC insulation → copper braid shield → PVC sheath · 300/500 V · ≈ 6.8 mm | |||||
| No. | Layer | Material / Construction | Nominal Thickness (mm) | Diameter (mm) | Function / Remarks |
| 1 | Conductors (×2) | Fine-stranded annealed Cu, Class 5, 2×1.0 mm² | — | ≈ 1.3 each | R ≤ 19.5 Ω/km |
| 2 | PVC insulation | Polyvinyl chloride, per core | ≈ 0.6 | ≈ 2.5 each | 300/500 V rated |
| 3 | Copper braid shield | Tinned copper wire braid, ≥ 80% coverage | ≈ 0.4 | ≈ 5.6 | EMI/RFI protection |
| 4 | PVC outer sheath | PVC, dark blue-gray | ≈ 1.1 | ≈ 6.8 | Outer protection |
| Key Dimensions & Properties (expanded) | |||||
| Finished cable diameter | ≈ 6.8 | mm | Overall | ||
| Approx. cable mass | ≈ 85 | kg/km | Light | ||
| Nominal voltage rating | 300/500 | V | Signal / control | ||
| Max conductor temp. | 70 | °C | PVC rated | ||
| Short-circuit temp. | 160 | °C | Max 5 s | ||
| Min bending radius (fixed) | ≥ 6 × OD ≈ 41 | mm | Shielded | ||
| DC resistance @ 20 °C | ≤ 19.5 | Ω/km | Flexible Cu 1.0 | ||
| Test voltage (AC) | 2.0 kV / 5 min | — | Routine | ||
| Nominal current (ampacity) | ≈ 9 | A | Audio / data | ||
| Shield coverage | ≥ 80 | % | Copper braid | ||
| Shield resistance | ≤ 20 | Ω/km | Braid | ||
| Number of cores | 2 | — | Signal pair | ||
| Standard | GB/T 9330 / IEC 60227 | — | Control cable | ||
| Application | Audio / data / sensor | — | Shielded | ||
| Schematic — not to exact scale. Finished OD ≈ 6.8 mm and weight ≈ 85 kg/km from cross-referenced industry samples. RVVP 2×1.0 is a shielded flexible control cable for audio and data signal transmission. Values marked (est.) require confirmation against the factory test certificate. | |||||
Construction Description
| Construction Description — RVVP 2×1.0 mm² shielded control cable | |||
| Layer-by-layer shielded control cable: 2×flexible Cu / PVC insulation / copper braid shield / PVC sheath · 300/500 V · 70 °C · ≈ 6.8 mm | |||
| 1. Product Identity & Ratings | |||
| RVVP 2×1.0 is a shielded flexible PVC control cable rated 300/500 V, 70 °C continuous. Built per GB/T 9330 / IEC 60227. Two 1.0 mm² fine-stranded copper conductors enclosed in a copper wire braid shield (≥ 80% coverage) and PVC outer sheath. Designed for audio and data signal circuits. Finished OD ≈ 6.8 mm, mass ≈ 85 kg/km, 100 m coils. | |||
| 2. Two Fine Flexible Copper Conductors | |||
| Two 1.0 mm² fine-stranded annealed copper conductors (Class 5, ~32×0.20 mm). DC resistance ≤ 19.5 Ω/km at 20 °C. The flexible construction balances current capacity and flexibility for audio and data applications. | |||
| 3. Copper Braid Shield | |||
| Tinned copper wire braid woven over the insulated cores with ≥ 80% coverage. The shield blocks EMI/RFI from nearby power cables and equipment — critical for audio and data signals that are sensitive to noise. | |||
| 4. PVC Outer Sheath | |||
| PVC outer sheath ≈ 1.1 mm thick, dark blue-gray. Provides mechanical protection and environmental resistance. The flexible sheath bends easily for panel wiring and equipment interconnection. | |||
| 5. Site Handling & Operational Notes | |||
| • Bend radius 6×OD (≈ 41 mm). • Use shielded connectors. • Ground shield at one or both ends. • At 85 kg/km, light. • Indoor use. • Audio/data signal (≈ 9 A max). |
8. Standards & Conformity. GB/T 9330 (plastic insulated control cables); IEC 60227 (international); GB/T 3956 (Class 5 flexible conductors). Rated 300/500 V.
9. Packaging, Storage & Logistics. 100 m per coil, plastic wrapped. Continuous marking: RVVP, 2×1.0, 300/500V, GB/T 9330. Store dry, indoor.
10. Procurement Specification. State "RVVP 2×1.0" + length. Specify shield coverage requirement (≥ 80%). Confirm against factory test certificate.
11. Cable Industry FAQ.
- Q1: What is the difference between RVVP 2×1.0 and RVVP 2×0.75? The 1.0 mm² version has 33% more copper cross-section, is slightly thicker (6.8 vs 6.0 mm), 30% heavier (85 vs 65 kg/km), and carries more current (9 vs 7 A). It sits between the miniature 0.75 and the control-rated 2.5 mm².
- Q2: Why choose 1.0 mm² instead of 0.75? When the signal has higher current (audio line-level, longer sensor runs, low-voltage DC signals up to 9 A), 1.0 mm² provides more margin and lower voltage drop. The 0.75 mm² is for microvolt-level signals only.
- Q3: Can it carry audio signals? Yes — RVVP 2×1.0 is commonly used for audio interconnection. The shield blocks RF interference, and the 1.0 mm² conductor handles line-level audio with minimal loss.
- Q4: What connectors work? RCA, 3.5 mm audio jacks, D-sub, or crimp ferrules. The 1.3 mm conductor diameter fits standard audio and data connectors.
- Q5: Is the shield the same as 2×0.75? Yes — copper wire braid ≥ 80% coverage. The shield diameter is slightly larger (5.6 vs 5.0 mm) because it wraps larger cores.
- Q6: Can it be used for 4–20 mA loops? Yes — 9 A capacity far exceeds the 4–20 mA loop current, and the shield protects the analog signal from industrial noise.
- Q7: What is the bending radius? 6×OD ≈ 41 mm — flexible enough for panel wiring and equipment interconnection.
- Q8: Can it be used outdoors? No — PVC sheath is not UV-resistant. For outdoor use, use outdoor-rated cable.
- Q9: How does it compare to RVVP 2×2.5? The 2.5 mm² version carries 16 A and is for control circuits. The 1.0 mm² version carries 9 A and is for audio/data. If you need more than 9 A, step up to 2.5 mm².
- Q10: What if I need to run it near power cables? The copper braid shield helps, but maintain at least 100–200 mm separation from power cables. Cross power cables at 90° when unavoidable.
- Q11: What is the standard? GB/T 9330 / IEC 60227 for plastic insulated control cables, rated 300/500 V.
Related Products
OEM 2 Core Flexible Cable 4x10mm2+1x6mm2 RVV For Three Phase Earth Power Supply
4 Core + Earth Cable 4x10mm²+1x6mm² RVV for Three Phase + Earth Supply Cable Designation & Meaning Code Meaning RVV R = Flexible copper conductor (Class 5), V = PVC insulation, V = PVC sheath 300/500 V Rated voltage U₀/U = 300/500 V; Uₘ = 500 V 4×10 mm² + 1×6 mm² Four power cores 10 mm² + one ...
4 Core Industrial Power Cable 10mm2 RVV PVC Flexible Stranded Copper
Industrial Power Cable 4 Core 10mm² RVV PVC Flexible Stranded Copper 300/500V Cable Designation & Meaning Code Meaning RVV R = Flexible copper conductor (Class 5), V = PVC insulation, V = PVC sheath 300/500 V Rated voltage U₀/U = 300/500 V; Uₘ = 500 V 4×10 mm² Four flexible cores, each 10 mm² copper ...
Stranded Copper 2 Core Flexible Cable Wire RVV 4x6.0mm2 PVC Flexible 300V 500V
Stranded Copper Wire 4 Core Cable RVV 4x6.0mm² PVC Flexible 300/500V Cable Designation & Meaning Code Meaning RVV R = Flexible copper conductor (Class 5), V = PVC insulation, V = PVC sheath 300/500 V Rated voltage U₀/U = 300/500 V; Uₘ = 500 V 4×6.0 mm² Four flexible cores, each 6.0 mm² copper ...
Heavy Duty 4 Core Control Flex Cable RVV 4x4.0mm2 PVC Stranded Copper Cable
Heavy Duty 4 Core Cable RVV 4x4.0mm² PVC Stranded Copper Flexible Cable Designation & Meaning Code Meaning RVV R = Flexible copper conductor (Class 5), V = PVC insulation, V = PVC sheath 300/500 V Rated voltage U₀/U = 300/500 V; Uₘ = 500 V 4×4.0 mm² Four flexible cores, each 4.0 mm² copper conductor ...
